A safe and efficient water slide system requires correct pump sizing, fast water turnover, and reliable sanitation to keep riders safe and slides properly lubricated.
Water Supply and Flow Rates
Lubrication flow: Water must cover the slide surface continuously to reduce friction.
Pump selection: Pumps must match the vertical lift and total friction of the pipe network.
Nozzle placement: Injection points at the start of the slide ensure instant lubrication.
Backup power: Critical systems benefit from emergency backup pumps to prevent dry riding.
Filtration and Circulation
Turnover rate: Water must pass through the filter system every 1 to 2 hours due to high bather loads.
High-rate filters: Sand, cartridge, or regenerative media filters remove tiny particles and oils.
Chemical treatment: Automated feeders maintain safe levels of chlorine or bromine and control pH balance.
Turnover return: Clean water returns through the top injection points and the bottom pool.
Surge Tanks and Catch Pools
Splash-out management: Riders displace large amounts of water when hitting the landing pool.
Surge capacity: A surge pit or balancing tank catches overflow water from the splash pool.
Auto-fill systems: Mechanical float valves add fresh water to make up for loss from splash-out and evaporation.
Main drains: Anti-entrapment drain covers protect swimmers at the bottom of the pool.
Flow sensors: Sensors shut down slide entry lights if water pressure drops below safe levels.
Emergency stops: Manual switches let staff cut power to pumps instantly.
Backflow prevention: Devices protect the local public water supply from contamination.
Company: Guangzhou Milan Amusement Technology Co.,LTD
Website: milanamusement.com
Contact us: Ms Aimee
WhatsApp/Wechat: +86-19875114360
Email: milanamusement@163.com
Address: No.28,Lanxing Street,Gaosha Road,Dagang Town,Nansha District,Guangzhou